Description
Decoder HU66 GEN 2/3
Opens and decodes VAG Group models from 2005 to 2014 – VW, AUDI, SKODA, SEAT, PORSCHE.
The Professional HU66 GEN 2/3 is designed with new technology and its old problems have now been fixed – the new HU66 GEN 2/3 decoder is easier to reinstall, with strong non-breakable leads and parts that resist the stretch needed to open locks in no time.
We check each tool for possible manufacturing errors. The quality you get is guaranteed and the service life is one year. We will repair your instrument free of charge. If your instrument cannot be repaired, we will review your options with you. (Please contact us at [email protected] for more information on warranty terms)
You will receive a link to your e-mail address with a video instruction about the exact instrument (with serial number) that you are.
This is a new patented innovation called EASY TOOL Decoder HU66 GEN 2/3.
In absolutely any situation, when the key is missing, Easy Tool Decoder HU66 GEN 2/3 allows you to unlock and decrypt HU66 GEN 2/3 locks. This Easy has been designed according to our new patented technology, which means that all previous problems have been solved. The result is a very safe and gentle plumbing tool.
Therefore, this advanced professional locksmith tool is designed to be used on VAG Group vehicle models such as VW, AUDI, SKODA, SEAT, PORSCHE and more.
See the description below for more product information!
Description Easy Tool Decoder HU66 GEN 2/3
When there is no car key with HU66 GEN 2/3 lock, the only professional solution to quickly open locked HU66 GEN 2/3 locks is our mechanical tool called Easy Tool Decoder HU66 GEN 2/3. . This professional tool is suitable for all VAG Group car models from 2005 to 2014-2015, including car brands such as VW, AUDI, SKODA, SEAT, PORSCHE and others.
All about the unlock process:
The overall unlocking process is simple and fast. To ensure smooth operation and the desired result, the operator must follow three steps.
But before that, you need to familiarize yourself with the structure of the Easy Tool Decoder HU66 GEN 2/3:
Easy Tool Decoder HU66 GEN 2/3 consists of two main parts: an access key (located on top of Easy Tool Decoder HU66 GEN 2/3) with 8 pins and a lower part consisting of three parts: 1. Tension wheel. , 2. Gate and 3. REAR wheel (listed in their hierarchical order from top to bottom).
As the name “Tension Wheel” suggests, operator tension during the unlocking process is paramount. Here, the operator needs to find the “medium tension” during the opening process, since a light tension will not unlock the HU66 GEN 2 lock, while a strong tension will only break or deform the tool.
The only thing to do is to follow exactly three simple steps:
1. The first step is to reset the Easy Tool Decoder HU66 GEN 2/3:
Before starting the main unlocking process, one preparatory step needs to be done: Reset the EasyTool Decoder HU66 GEN 2/3 (reset the pins on the tool).
For this step, turn the REAR wheel all the way to the right and pull the gate back to open the gate. Then take the reset tool and press it against each of the 8 EasyTool Decoder HU66 GEN 2/3 holes that you can find on the top of the tool (access key). This procedure resets 8 pins. Then close the gate wheel by pushing it in the direction of the tension wheel.
If all the pins are aligned, the EasyTool Decoder HU66 GEN 2/3 is ready for the second step!
2. Second step – is the gate on the right side or the wrong side?
For smooth unlocking, it is very important to install EasyTool Decoder HU66 GEN 2/3 correctly. Therefore, to ensure the correct side, insert the EasyTool Decoder HU66 GEN 2/3 inside the lock, turning the REAR wheel all the way to the left and keeping the GATE wheel completely closed (push the flap towards the tension wheel).
If the shutter pops up when you press the REAR wheel, then the EasyTool Decoder HU66 GEN 2/3 is not inserted correctly. Then you should turn the EasyTool Decoder HU 66 GEN 2/3 180 degrees and insert it into the specified lock again.
If the gateway does not pop up, then you have inserted the EasyTool Decoder HU66 GEN 2/3 correctly and you can continue from the third step, the main unlock process.
3. Step Four – Unlock Process:
=
At this point, you have already completed all the preparatory steps and EasyTool Decoder HU66 GEN 2/3 is ready for the main unlock procedure.
Therefore, the first step is to open the GATE to bring the tool into working position. Then there are two different ways the operator can proceed to open the lock:
The first way: turn the tension wheel all the way to the left and hold it in this position.
At the same time, turn the BACK wheel to the left until the stop point is reached. When you reach the stopping point, rotate the REAR wheel to its original position (move it to the right) and loosen the idler wheel. The next step is to turn and hold the idler wheel to the right while turning the REAR wheel to the left until the stop point is reached. If the break point is reached, turn it back to its original position (to the right) by loosening the idler wheel. This procedure should be repeated several times. Attention: Make sure the idler wheel is medium to high during the opening procedure!
Then the last step before opening the lock involves again first turning the idle wheel all the way to the left (hold it in this position), while turning the REAR wheel to the left until the stopping point is reached. Rock this time
You will receive a link to your email address with a video instruction on which tool (with serial number) you are going to purchase. This serves as a guarantee that the tool works.
What is waiting for you?
Fast unlock and decode process
Simple handling
Professional unlocking and decoding locks HU66 GEN 2/3
Without damage
Reviews
There are no reviews yet.